Go Back   PCA 914 Special Interest Group Forums > FAQ

Notices

Search FAQ Search FAQ
Search Word(s):
Matching Options:
Search in:

What is the 914 SIG?

The 914 SIG (Special Interest Group) is a part of the Porsche Club of America (PCA). It was founded in 1998 to foster pride in ownership and to increase communication among 914 owners. We do this via this web site and by hosting events, where 914 owners can drive, socialize, and compete.


How do I join the 914 SIG?

Membership in the 914 SIG is free and does not require PCA membership. You can join the 914 SIG by visiting our Registration Page. Registrations are reviewed manually.  Once you are approved, you are encouraged to add each of your cars to your Garage.


Can you compare the various 914/4s for me?

Here is a quick run-down of the 914-4 models. Some sources say that a few 1969 models were produced.

  Chassis Engine Transmission Production
Quantity
Passenger
Seat
Seat
Belts
Steering
Column
Interior Trans Bumpers Wt.
Year Numbers Types Numbers Description Types Numbers Description
1970 4702900001 022 W0000001 1.7L 80 HP D-Jet 914.300/11 HA0000001 5-speed 13,312 Fixed Fixed 914 Spartan Tail Metal 1984
            HB0000001 5-speed w/LSD                
1971 4712900001 022 W0057461 1.7L 80 HP D-Jet 914.300/11 HA0014826 5-speed 16,231 Fixed Fixed 914 Spartan Tail Metal 1984
            HB0000004 5-speed w/LSD                
1972 4722900001 022 W0129582 1.7L 80 HP D-Jet 914.300/11 HA0030094 5-speed 21,580 Adj Both 914 Improved Tail Metal 1984
    022 EA0000001 1.7L 80 HP D-Jet (USA)                      
1973 4732900021 022 W0170001 1.7L 80 HP D-Jet 914.300/12 HA0051316 5-speed 27,660 Adj Inertia 914 Better Side Metal 2138
    022 EA0057001 1.7L 80 HP D-Jet (USA)                   w/front  
    022 EB0000001 1.7L 72 HP D-Jet (CA)                   rubber  
    039 GA0000001 2.0L 95 HP D-Jet (USA)                   in USA  
    039 GB0000001 2.0L 100 HP D-Jet (Europe)                      
1974 4742900001 022 EC0000001 1.8L 76 HP L-Jet (USA) 914.300/12 HA13083 5-speed 21,370 Adj Inertia 914 Better Side Metal 2138
    021 AN0000001 1.8L 85 HP Carbs (Europe)                   w/front & rear  
    039 GA0006766 2.0L 95 HP D-Jet (USA)                   rubber  
    039 GB0007402 2.0L 100 HP D-Jet (Europe)                   in USA  
1975 4752900001 022 EC0037552 1.8L 76 HP L-Jet (USA) 914.300/12 HA05084 5-speed 11,368 Adj Inertia 914 Better Side Plastic 2205
    021 AN0008798 1.8L 85 HP Carbs (Europe)                      
    039 GC0000001 2.0L 88 HP D-Jet (USA)                      
    039 GB0009822 2.0L 100 HP D-Jet (Europe)                      
1976 4762900001 022 EC0045073 1.8L 76 HP L-Jet (USA) 914.300/12 HA05085 5-speed 4,073 Adj Inertia 914 Better Side Plastic 2205
    021 AN0008899 1.8L 85 HP Carbs (Europe)                      
    039 GC0002915 2.0L 88 HP D-Jet (USA)                      
    039 GB0010779 2.0L 100 HP D-Jet (Europe)                      


Can you compare the various 914/6s for me?

All 914/6 models were delivered with engines from the 1969 911T. This engine had Weber 40 IDT carbs, a 8.6:1 compression ratio, and was rated at 110HP @ 5800 RPM.

Here is a quick run-down of the 914/6 models:

  Chassis Engine Transmission Production
Quantity
Passenger
Seat
Seat
Belts
Steering
Column
Interior Trans Bumpers Wt.
Year Numbers Types Numbers Description Types Numbers Description
1970 9140430001 901/36 6400001 European w/ 5-speed 914.300/01 7500001 5-speed 2,638-2,641 Fixed Fixed 911 Spartan Tail Metal 2072
  thru 901/37 6403001 European w/ Sporto 914.300/05 7600001 Sportomatic (4)       (Key on        
  9140432668 901/38 6404001 US w/ 5-speed             left)        
    901/39 6407001 US w/ Sporto                      
1971 9141430001 901/36 6410001 European w/ 5-speed 914.300/01 7510001 5-speed 407 Fixed Fixed 911 Spartan Tail Metal 2072
  thru 901/37 6413001 European w/ Sporto 914.300/05 7610001 Sportomatic (4) to     (Key on        
  9141430443 901/38 6414001 US w/ 5-speed       423     left)        
    901/39 6417001 US w/ Sporto                      
1972 9142430001 901/38 6420001 US w/ 5-speed 914.300/01 7520001 5-speed 260 Adj Inertia 914 Improved Tail Metal 2072
  thru                   (Key on        
  9142430260                   right)        

Some sources say that a few 1973 models were produced.

In addition to the production models, there were 914/6GT race cars produced...27 in 1970 and 20 in 1971. 916 models were produced in 1972...a total of 11. However, these were not really race cars.


What should I watch out for when buying a 914?

Rust. There's no such thing as a rust-free 914. If you've found a totally rust-free 914, check again. Chances are you'll find rust somewhere. Particularly prone are the battery tray (check for it having been replaced) on the right hand side of the engine compartment, everything below that (which includes the right-rear suspension!), the firewall in front of the engine, the jack points on the sides of the car, longitudinal members of the frame (the inner rockers), the rear of the rear trunk floor, and the lower channel where the windshield sits are known trouble spots.

Body Flex
. You can check for flex with the "Big Butt Test." Get someone of large size (>200 lbs) to sit in the passenger's seat (the side with the battery!). With the door closed, roll the window up. Then try to open the door. If the window sticks at the top or back edge, the body is flexing. Also try the driver's seat. Body flex is fairly bad news. It can be cured, but it is generally time-consuming and expensive.

Oil Leaks
These are relatively common. Some of the cures are cheap in parts, but expensive in labor (e.g., oil cooler seals). The oil pressure idiot light sender, on top near the distributor, can leak. Push rod tube seals commonly leak, but can be replaced with the engine in the car! The aforementioned oil cooler seals, the galley plugs, and the front or rear main seals are also not uncommon leaks. The engine may need to be removed to fix these.

Bad Shifting
The 914 is known for transmission shifting woes. Sloppy shifting is part of the car's character, especially on the pre-73 cars. Replacing the shift linkage bushings can help; these parts are plastic and can wear quickly. Most cars will crunch going into first gear; this is generally regarded as "normal", except for a brand-new transmission. Some will also crunch going into second. This may mean a rebuild is in the near future.

Broken Clutch Cable Tube
Another source of "transmission" grinding noises is the clutch cable. Specifically, the tube in the center tunnel that the cable goes through. Rust and time can cause this tube to break loose from the tunnel wall, which will keep the clutch from fully disengaging. This causes grinding when shifting gears.The tube can be re-welded, but it may require cutting open the tunnel.

Top Leaks
Take the car to a hand spray wash and see if water gets into car. If so, check for signs of previous water damage.

Taillight Leaks
The taillights can also leak water into the rear trunk. Look under carpet for rust.

Broken Hinges
The hinge pivots for the rear trunk lid can break off.

DPO Mods
Lots of 914s have had significant modifications performed by the Dreaded Previous Owner. These modifications can be good, but more often, they totally screw the car up! Have someone knowledgeable check the car for condition and originality. Know what you are buying.


What is a Ramble?

A "Ramble" is an event for 914s and their owners. The name was invented by John Dunkle in 1997. The term "Ramble" has been used to describe 914 events all over the US. These events normally involve several activities (Car Show, Technical Seminar, Rally, Tech Quiz, Autocross, Tour, Banquet, etc).


What is a Register?

First of all, there's no charge for Register or SIG membership and we are quite non-commercial. You should also understand that at least where the 914 SIG is concerned, there is one SIG and 6 Registers. Further, your car is the member in a Register, but you join the SIG. The 914 Special Interest Group and its 6 Registers is a sub-division of the Porsche Club of America (PCA). It is intended to comply with the general objectives of PCA, i.e.

"To encourage the highest standard of safety and courtesy on the highways, and to increase the enjoyment of owning a Porsche by the exchange of technical information and by engaging in such automotive and social events as may be agreeable to the members"

Additionally, the 914 Special Interest Group & Registers go one step further and provides a focal point for owners of 914 Porsches, to be able to discuss and learn more about this particular model. The primary focus of each Register is to build a database of each car model with the various identifying numbers, options, and modifications. We also organize events, where owners can meet, socialize, compete, and learn more about their cars.


Is membership in the 914 SIG private?

Yes.  All personal information is hidden from public view.  Some information may be available to your fellow members.  Sensitive personal information is never published (name, address, phone number, e-mail, VIN, etc...).


What's in it for me?

There are many benefits to being part of the 914 SIG. These include being a part of a friendly network of owners with whom you can discuss the pros and cons of just about any issue pertaining to your car. Whatever the problem you have with your car, some other SIG member has probably had a similar experience and could give you advice. We organize events where you can meet other 914 owners, see and touch their cars, talk about issues, plus learn more about how to maintain, upgrade, and use them. We have fun!



All times are GMT -4. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2010-2014, Porsche Club of America. This site is owned and operated by the
Porsche Club of America. It is not affiliated in any way with Porsche AG or Porsche Cars North America.